Transitions between fill slopes on the same alignment

Can I confirm that the design above has been created using different separate templates with different fill slope values rather then a single template set up with a different fill slopes depending on embankment height.

A single template setup with different fill slopes depending on embankment height will do the transitioning between slope automatically.

Separate templates with specific fill slopes will require a transition template to be placed between each template with a variable fill slope, i.e start at 1:1.5 end at 1:2.

Can I confirm that the design above has been created using different separate templates with different fill slope values rather then a single template set up with a different fill slopes depending on embankment height.

A single template setup with different fill slopes depending on embankment height will do the transitioning between slope automatically.

Separate templates with specific fill slopes will require a transition template to be placed between each template with a variable fill slope, i.e start at 1:1.5 end at 1:2.

Yes that's right. The embankment height is the same so I cant make a template that changes because of the height. The difference in slopes are because of a concrete structure that needs to be avoided. How do i make a transition template? My slopes transitions between 1:2,2 -> 1:2 -> 1:1,8 -> 1:1,5 -> 1:1.