https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/104366/ground-profile-from-chainI have a chain in COGO which was created from a complex chain in a 3D model (each vertices having an elevation), however, if I look at the points created, there is no elevation and of I visualize the chain on the front view, it is flat. Bottom lineen-USTelligent Community 12https://communities.bentley.com/thread/313061?ContentTypeID=1Tue, 03 Feb 2015 17:37:12 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:7ae4723c-3c2d-4fa5-9083-afeac1effd20Beebe Ray<p>No automatic way, but you can use the Survey Auto Store Graphics and it will store the points with the X,Y,Z and once you have the cogo points with elevation you can store a profile from the points.</p><div style="clear:both;"></div>