https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/104437/unable-to-edit-user-geocoordinate-library-dtyWe are using the MS_GEOCOORDINATE_USERLIBRARIES variable to point to our .dty file on the server. We have had success on the first few times we have used this to copy one of the entries, rename it, and then modifying it to build our custom library. Ien-USTelligent Community 12https://communities.bentley.com/thread/313499?ContentTypeID=1Fri, 06 Feb 2015 12:44:34 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:decf0075-b2dc-4327-a3b8-9b0392ed2576Ricardo VillegasI recommended check the pcf file, most likely is using the old pcf, change the extension to this file and reload microstation, check if microstation create a new pcf file, then test the MS_GEOCOORDINATE_USERLIBRARIES variable if is working properly.<div style="clear:both;"></div>https://communities.bentley.com/thread/313375?ContentTypeID=1Thu, 05 Feb 2015 16:53:46 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:22742552-32a4-40ba-9c84-e942eaeec31bkcaitchWe have don&#39;t have our PCF file set per project. Our PCF file is set per client. This would be the same PCF file that I used previously to edit the .DTY file (which is why it is confusing).<div style="clear:both;"></div>https://communities.bentley.com/thread/313357?ContentTypeID=1Thu, 05 Feb 2015 15:57:41 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:8154fe71-0639-4c5e-be51-033e0bd72f34mphillThe Project Configuration File (pcf) is where we store the variable per project. Is it possible the variable is not in newly created pcf files? Or the incorrect pcf file is being used?<div style="clear:both;"></div>