Is there a quick way in Ss3 to generate a proposed top of curb profile from a corridor model. Hopefully its not as cumbersome as it was in Ss2.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Nico, all I get from the pop up menu is shown below. I need the prop top of curb profile to write to the GPK so I can bring it in to my profile that I generated with the SS2 tools.
OK, this should be more simple than it is. I am now in GEOPAK SS4 08.11.09.788. My process is this...
1. I turned create template geometry to True.
2. Re-processed the corridor.
3. Viewed the profile.
4. Exported the profile to native.
5. Displayed my TOC profile in my master profile drawing.
The profile start sta is 0+00, not my project stationing. (way to the left of my alignment).
The profile always shows a steady gradual incline or decline, not the true roller coaster it should be (see below)
Also, I have gaps in my curb (side roads, driveways, etc.) and the profile truncates these gaps to make one line which isn't correct. The picture below shows where the gap is in profile mode.
I don't understand how GEOPAK can process the model and give an accurate depiction of the TOC in the 3D view but it cannot simply convert that to a profile I would think this would be a very easy process). This is getting very frustrating. Is there anyway to create the TOC via XSEC like in SS2 and the plan grade report option. Can anybody help me with this problem. I don't have much hair left to pull out. I searched for videos on this topic but cannot find any. I would like a solution for SS4 as well as SS3, although SS4 is priority right now. I have been faking in the TOC but cannot do it any more as final submittals are coming up fast.