MX V8i SS4 - Crappy Vertical Geometry tools

Hi Krzysztof

I'll check the SR and the Defect that was logged and also when this is scheduled for and Feedback to you.

Simon Pegg

Hi Krzysztof,

We found where you first reported this in a forum post last November and Defect 152217 was filed at that time. (link to that post below)  Due to the timing of the defect report, it did not make it into the SS4 release, however, the defect is marked as fixed and is being tested for the first SS4 maintenance release.  Thank you for your patience in this matter.

 http://communities.bentley.com/products/road___site_design/f/5922/t/102551

Thank you Kevin, it's a really good news.

BTW. Do you know if Defect 151077 will be also fixed in the next release?

Hi Krzysztof,
Yes, it looks like a fix has been made, but no testing has occurred yet. So if it passes testing, it will be included.

It would be great if "Complex transition between any Element and Arc" tool under Horizontal geometry is fixed as well. (the defect is described here, not showing all possible solutions - communities.bentley.com/.../304130)

Thanks,
Krzysztof