https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/104892/what-is-the-effect-of-changing-the-pivot-edge-entry-in-the-ss3-superelevation-editor-toolI am trying to generate and apply superelevation at an offset from my horizontal alignment (similar to using a tie in the prior superelevation tools). I want to generate my superelevation based off of my stationed centerline, but my true pivot point isen-USTelligent Community 12https://communities.bentley.com/thread/315382?ContentTypeID=1Wed, 25 Feb 2015 17:19:44 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:02b047e3-234f-49c0-b4ea-caf22a350240Beebe Ray<a href="http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/19642.apply-super-elevation-at-an-offset-from-centerline">communities.bentley.com/.../19642.apply-super-elevation-at-an-offset-from-centerline</a><div style="clear:both;"></div>https://communities.bentley.com/thread/315371?ContentTypeID=1Wed, 25 Feb 2015 15:28:14 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3a328123-8ee8-4968-b188-b37615bfd822Beebe RayMy understanding is that you would define the super lanes with an offset. Then when applying the super to the corridor you would set the inside edge as the super point and the outside edge as the pivot point.<div style="clear:both;"></div>