xml report for features

Question

I have a profile that I've created that is a little odd but it's what we needed. The stationing is along the center of the road but the existing ground line and proposed gutter elevations are along a feature. I have these annotated in the profile to show the elevations using the stationing along the centerline so that worked as I needed. Now they would like me to give them a report of those numbers but I can't seem to be able to find an xml report that will give me the information I need. I was wondering if anyone has anything that I could use. If you do a surface report, it does give you the option of picking the feature you want but it doesn't have anywhere to tell it what alignment to use or interval (50').

caddcop · Accepted Answer

Try a Station Base, Station Offset or Clearance. All of these support reports from or to an alignment against surface features in addition to other alignments and/or COGO points. This is from memory, but I am pretty sure they all do. Its possible that station intervals are not supported on all.