https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/105565/xml-report-for-featuresI have a profile that I&#39;ve created that is a little odd but it&#39;s what we needed. The stationing is along the center of the road but the existing ground line and proposed gutter elevations are along a feature. I have these annotated in the profile to showen-USTelligent Community 12https://communities.bentley.com/thread/318000?ContentTypeID=1Mon, 23 Mar 2015 15:21:19 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:50c13a38-f526-47de-b687-836a0bc2e6c8Marc FreshleyThis is what I was looking for. I did a station offset then transverse feature and it gives the elevations I was looking for.<br /> I need to eventually learn more about xml. You can set the interval also.<div style="clear:both;"></div>https://communities.bentley.com/thread/317907?ContentTypeID=1Fri, 20 Mar 2015 17:15:07 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:2e347817-cf01-4d40-bb60-c29852f81e1ccaddcopTry a Station Base, Station Offset or Clearance. All of these support reports from or to an alignment against surface features in addition to other alignments and/or COGO points. This is from memory, but I am pretty sure they all do. Its possible that station intervals are not supported on all.<div style="clear:both;"></div>