Hello Community.
I have a complex corridor with several Corridors Objects.I need to change horizontal alignment linked to that coriidor. Using an alternative horizontal alignment. Is this possible? Or I have to repeat again the corridor with all conditioning factors. (Parametric Constrains, Point Controls, End condition exceptions....)
Thanks.
I tried this "Edits to the alignments are done in the ALG file and then imported in to the DGN. If the horizontal alignment has the same name then it will update in the DGN upon import." but the result was not desired.
To update my Geometry reference my corridor has disappeared.
I can´t edit the alignment in place using the civil handles and rules..
The civil handles are visible in Complex Elements Type 1, but they are not visible in Complex Elements Type 2. Why?
Is posible convert Complex Elements Type 2 in Complex Elements Type 1?
------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I managed to use my alternative alignment using it as a Point Control.
Even though this is not the ultimate solution.
Someone in Bentley Knows if OpenRoad allow in future versions modify the horizontal alignment associated with a corridor?
In SS2 this was to be done without problem in the IRD.