I would like to annotate sta offset at various points in my xsec's (EOP, TOC, etc.) like we were able to do in SS2. The pic below is what I am looking to do. Is this possible in SS3/SS4? If it is I cant find it.
You can use the Annotate Cross Section tool under the Corridor Task Menu.
You can choose the offset and elevation as shown to get the above result. You will need to have a cell or character on the element as shown below. This is done through the feature definition/element template you use to tell us how to display in cross section.
The feature definition used in this case places an 'X' in the cross section view to be labeled later.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Answer Verified By: Chuck K.