Pavement layer and subgrade Design(for existing pavement)

RE: Pavement layer and subgrade Design(for existing pavement)

VAIBHAV GAURKAR — Sun, 11 Oct 2020 15:24:44 GMT

Hello Dipak, I am interested in knowing overlay design.Please share it with me.

RE: Pavement layer and subgrade Design(for existing pavement)

VAIBHAV GAURKAR — Sun, 13 Oct 2019 17:23:32 GMT

Widening of existing road requires overlaying on existing BT surface.If this can be done using DESIGN>PAVEMENT & SUBGRADE DESIGN (and not requiring PAVEMENT & SUBGRADE DESIGN (TO EXISTING PAVEMENT)), please let me know.

RE: Pavement layer and subgrade Design(for existing pavement)

Amita Shinde — Mon, 17 Sep 2018 05:32:10 GMT

Please make you are working with MXRoad Suite and not MXRoad.

RE: Pavement layer and subgrade Design(for existing pavement)

Santosh Kumar Rai — Mon, 17 Sep 2018 05:12:41 GMT

Hi Amita,

I am using MX Road SS2. All the overlay tools are grayed out, same as in your snap shot. How do I make them active and work with these tools?

RE: Pavement layer and subgrade Design(for existing pavement)

Chetan.R — Thu, 03 Aug 2017 09:38:35 GMT

Can u please send me the video showing overlay method, including pavement layer designs.

RE: Pavement layer and subgrade Design(for existing pavement)

Dipak — Wed, 02 Aug 2017 17:53:32 GMT

Hie, I have worked on a lot of projects of similar requirements without using the overlay design option. Its late, but if u r still interested to know how, then let me know..

RE: Pavement layer and subgrade Design(for existing pavement)

Purva Lakde — Fri, 18 Dec 2015 07:50:10 GMT

Hello Chetan,

Could you please clarify which snapshot would you like to assist from us ? Please clarify as you mentioned "existing EOP can be obtained" in more detail.

Regards,
Purva

RE: Pavement layer and subgrade Design(for existing pavement)

Amita Shinde — Fri, 18 Dec 2015 06:11:22 GMT

Hi Chetan,

Here's the screen shot for the Overlay tools.

RE: Pavement layer and subgrade Design(for existing pavement)

Chetan.R — Fri, 18 Dec 2015 05:55:13 GMT

Sir i have mx road ss4 suite- can i have a screen shot of overlay tools from which, existing EOP can be obtained.

RE: Pavement layer and subgrade Design(for existing pavement)

Mark Marnell — Wed, 19 Aug 2015 07:59:18 GMT

You would have to use the overlay tools (under the Design menu) which are part of MXROAD Suite - all versions.

RE: Pavement layer and subgrade Design(for existing pavement)

Chetan.R — Wed, 19 Aug 2015 04:47:30 GMT

Ok, can i design through ss3 (Mx-Road V8i)for existing pavement.

RE: Pavement layer and subgrade Design(for existing pavement)

Mark Marnell — Tue, 18 Aug 2015 12:21:27 GMT

To get an idea of the tools, there is the following training path.

learn.bentley.com/.../ViewLearningPathDetails

To go back to your original question on MX, are you using MXROAD or MXROAD Suite? If you are using the option 'Design > Pavement and Subgrade design. . ', it does not fit the design to an existing road (that is what the overlay tool set is for).

RE: Pavement layer and subgrade Design(for existing pavement)

Chetan.R — Tue, 18 Aug 2015 10:19:10 GMT

Thank you sir, but from this how to get pointcontrols of the existing EOP .

RE: Pavement layer and subgrade Design(for existing pavement)

Mark Marnell — Tue, 18 Aug 2015 08:54:05 GMT

The OpenRoads tools are part of the MX/InRoads/GEOPAK install (and have been for several versions)- you do not need to download anything.

Please see the following to get an idea of the functionality.
communities.bentley.com/.../road_and_site_design__wiki

RE: Pavement layer and subgrade Design(for existing pavement)

Chetan.R — Tue, 18 Aug 2015 08:13:03 GMT

can i now to download open road software

RE: Pavement layer and subgrade Design(for existing pavement)

Christiaan Post — Tue, 18 Aug 2015 07:05:21 GMT

The best way to get it done is to make pointcontrols of the existing EOP With the great new tools from "Openroads" in MX SS4