The slope/end condition lines are not showing up when I create cross sections. The lines show up in the corridor, 3d model and dynamic cross sections.
The screen shot below shows the points of the ditch bottom and where the back slope meets existing; there's just no lines. (All the levels in the XS model are turned on.)
I've tweaked the ditch slopes and depths in my template thru my design process but have cut cross sections previously and the lines have displayed.
using V8i SS3 08.11.09.608
Geopak V8i 0811.08.722
Sorry, screen shot was not attached in initial post. Here it is.
I tried changing the feature definition and the line shows up in the cut cross sections.
I have cut the sections in the recent past without trouble (the lines showed up).
Recently I have been getting the Selecting Settings pop-up shown below. Does this have something to do with the lines not displaying?
That message is referring to your Survey Settings, so I don't think it would have any effect on corridor features.
There must be something within the feature definition or element template itself. Carefully check the properties for these and compare them to the feature definition that is working. If you want me to take a look at it, I will be glad to. I will just need you to provide your data.