Geopak SS3 OpenRoads Superelevation and Geometry Import

RE: Geopak SS3 OpenRoads Superelevation and Geometry Import

Beebe Ray — Wed, 07 Oct 2015 18:26:41 GMT

I don't see it so if you could please post it on the ftp site

RE: Geopak SS3 OpenRoads Superelevation and Geometry Import

Shane Albritton — Wed, 07 Oct 2015 15:18:42 GMT

I added them to this link provided to me in a different post.

bentley.sharefile.com/upload-storagecenter.aspx

Should I add them to the ftp site instead?

RE: Geopak SS3 OpenRoads Superelevation and Geometry Import

Beebe Ray — Wed, 07 Oct 2015 15:14:05 GMT

I do not see any files attached. Could you provide a link to where you attached them? or place them on our FTP site

ftp.bentley.com/.../incoming

You can use the Advanced Reply Editor to place them within your post.

RE: Geopak SS3 OpenRoads Superelevation and Geometry Import

Shane Albritton — Tue, 06 Oct 2015 13:57:17 GMT

I have uploaded a couple of Files. "Ramp A" was the simplest file where I saw this happen. As I stated earlier, this would not happen every time and after playing around with it I was unable to pin point what was causing (or not causing) the issue. The chain is called "PRRAMPA" and profile "PRRAMPA" in the .gpk file provided.

RE: Geopak SS3 OpenRoads Superelevation and Geometry Import

Beebe Ray — Tue, 06 Oct 2015 13:24:43 GMT

Could you provide files to test this? My recommendation for workflow would be to adjust the profile in OpenRoads and not reimport it from the GPK file.