Inroads Roadway Designer Plan View Graphics

Question

Recently, when creating new corridors, the graphics in the plan view of roadway designer are shrinking. The graphic showing the active cross section in plan view varies in size as shown in the photos below. It's becoming an issue when cleaning up end conditions. Anyway to adjust this?

The Zen Dude · Answer

Todd, the only observation that I've ever made about this line (what's officially called the "Current Station Locator", or the "straight yellow line" ; ) is that the length (how wide it is) is some function of the length of the overall corridor model. The longer the alignment the longer that line becomes. The shorter the corridor model is, the smaller that line gets. It kinda bothers me when I have a short corridor like your first picture and I can't see the secondary alignments in action. It was probably a good idea at the time when it was first conceived, and at least it was considered that for a very short corridor that line didn't need to be super-wide. Thinking about that line in hindsight, it should have been determined by some value added to the farthest corridor control or cut / fill catch, or at least a fixed width that would accommodate the 'average' road project width. 
 
I know of no way to adjust it other than creating a much longer alignment than you are actually modeling ...which you would never really do : \

Hakan Turhan · Answer

Zen did you find solution this issue?