• State Verified Answer
  • Replies 18 replies
  • Answers 2 answers
  • Subscribers 142 subscribers
  • Views 6430 views
  • Users 0 members are here

Roadway Designer/Corridor Management

Nate Perius
Offline

I'm trying to build a corridor and have already imported my geometry (chain, profile, drafting standard) but when I go to build the corridor it keeps saying none for a vertical alignment.

It has the Horizontal Alignment, just not the vertical.

Anyone have any suggestions?

Thanks

Parents
  • 0 Offline
    I’ve come across another issue I was hoping you could help with.
     
    My corridor was working great. Then I had to make a change to my vertical alignment. Redefined the profile in geopak, re-imported the geometry into my corridor model but the corridor was still following the OLD profile.
     
    My profile is named PRE1804. I tried to do a work around by doing a “save as” of my updated profile as PRE1804_SAVE. I then deleted the original PRE1804 profile. Then loaded my PRE1804_SAVE and did another “save as” calling the new one PRE1804.
     
    Went back to corridor modeling, the geometry leaf was blank again, so I re-created and re-imported my geometry using PRE1804 and my profile was still following the outdated vertical alignment.
     
    So then I changed my geometry to follow the PRE1804_SAVE version (same profile just renamed), re-imported, opened Roadway Designer, and got an error message saying it couldn’t find my vertical alignment.
     
    So I changed by geometry again to look for PRE1804, re-imported and when I open Roadway Designer I get the following error message:
     
    [Roadway Design Validation Results
     
    ERROR: For corridor 1804, the vertical alignment PRE1804 with Unique Identifier {64099AB0-67D9-4169-AB79-970C30C1AE85} cannot be found in the current geometry project.
    Please open the correct project, or reselect the vertical alignment in the Corridor Management dialog box.]
     
    Additionally, when I go the corridor management box, the only option I have in the Vertical Alignment pull done is “None”
     
    ANY suggestions would be GREATLY appreciated.
     
    Thanks
     
Reply
  • 0 Offline
    I’ve come across another issue I was hoping you could help with.
     
    My corridor was working great. Then I had to make a change to my vertical alignment. Redefined the profile in geopak, re-imported the geometry into my corridor model but the corridor was still following the OLD profile.
     
    My profile is named PRE1804. I tried to do a work around by doing a “save as” of my updated profile as PRE1804_SAVE. I then deleted the original PRE1804 profile. Then loaded my PRE1804_SAVE and did another “save as” calling the new one PRE1804.
     
    Went back to corridor modeling, the geometry leaf was blank again, so I re-created and re-imported my geometry using PRE1804 and my profile was still following the outdated vertical alignment.
     
    So then I changed my geometry to follow the PRE1804_SAVE version (same profile just renamed), re-imported, opened Roadway Designer, and got an error message saying it couldn’t find my vertical alignment.
     
    So I changed by geometry again to look for PRE1804, re-imported and when I open Roadway Designer I get the following error message:
     
    [Roadway Design Validation Results
     
    ERROR: For corridor 1804, the vertical alignment PRE1804 with Unique Identifier {64099AB0-67D9-4169-AB79-970C30C1AE85} cannot be found in the current geometry project.
    Please open the correct project, or reselect the vertical alignment in the Corridor Management dialog box.]
     
    Additionally, when I go the corridor management box, the only option I have in the Vertical Alignment pull done is “None”
     
    ANY suggestions would be GREATLY appreciated.
     
    Thanks
     
Children
No Data
Communities
Support and Services
Training and Learning
Social Media