SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Ryan Platner — Fri, 06 Sep 2019 13:47:47 GMT

I am currently having this same issue. Is there any updates yet?

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Wesley Nyberg — Wed, 28 Oct 2015 15:50:13 GMT

Thank you!

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Chris Key — Wed, 28 Oct 2015 12:58:40 GMT

Hi Wesley, I apologize for not responding to the post. I filed a defect for development to look at the issue and did not update the request. There are no updates on the issue yet.

Defect 329279 filed

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Wesley Nyberg — Wed, 28 Oct 2015 12:17:25 GMT

Any luck on finding out what is going on?

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Wesley Nyberg — Fri, 16 Oct 2015 18:37:18 GMT

I was able to duplicate the pipe appearing in the cross sections 0.1 unit before or after (but nothing less, like 0.001 or 0.01).

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Chris Key — Fri, 16 Oct 2015 15:46:27 GMT

I will need to investigate a little more. If I cut sections slightly before (0.1 units) or slightly after your cross section station using the 'Custom' section, the pipe is appearing in those sections. But I have duplicated your issue with a new cross section set and the cut sections are not showing the pipes the whole station you listed in the PDF.

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Wesley Nyberg — Fri, 16 Oct 2015 14:56:40 GMT

I have attached a zip file with my dgn's. The file with cor in the name is my corridor file. I have also included a pdf of all the drainage structures I have and there station. It seems kind of random whether a pipe displays or not. Let me know if you have any other question. Thanks!

communities.bentley.com/.../Suda-display.zip

RE: SS4 OpenRoads Cross Sections not reflecting 3D SUDA Model

Chris Key — Fri, 16 Oct 2015 14:04:06 GMT

Do you have a DGN you can provide for us to look at the issue? Also, please provide information that would be helpful to troubleshoot the problem. Information such as the station you are at in the cross section model. Are you looking at the same station in the cross section model and the Cross Section Viewer? Do you have other pipes that aren't showing in cross sections or is it one station?