SS4 Corridor Clipping

I keep getting the following error when I try to clip a corridor with another corridor:  An invalid clipping boundary was encountered and ignored.

What could be causing this?

Parents Reply
  • I guess I can use a complex terrain model.

    I'm modeling a linear parking lot that can't be modeled using a simple corridor, so I modeled the pavement and then the curbs. I also used the gutter pan alignments as point controls to limit the widths of the pavement, but I needed the pavement to run slightly wider than the gutter pan.

    So I need to clip the pavement at the adjacent corridors after the fact. I think I can start with the pavement surface and merge in the surrounding surfaces and they will trim the terrain at those points.

    And I will need to build a new pavement surface model using the trimmed surface to apply a surface template for cross sections.


    Charles (Chuck) Rheault
    CADD Manager

    MDOT State Highway Administration

    • MicroStation user since IGDS, InRoads user since TDP.
    • AutoCAD, Land Desktop and Civil 3D, off and on since 1996
Children
No Data