I have seen other discussions regarding unwanted levels automatically turning on in dynamic cross sections. I was curious if an enhancement was filed regarding this? I agree that at times you may want to see everything in your dynamic cross sections but there are always instances when you're trying to see something specific and its extremely difficult when all the items in your design are displayed. Having the ability to manually turn levels on and off would be extremely helpful.
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Thank you for responding. I am using Inroads SS4 (V08.11.09.845). The levels that are turned on and off on my main screen seem to have no bearing on what is shown in my dynamic views. I am able to turn levels on and off in my cross section dynamic view until I click the arrow to move forward or backward along the corridor. For example, in the picture below I have my top pavement layer as well as my grading off the edge of road turned off in my dynamic view.
As soon as I click to advance through the corridor both of those levels automatically turn back on (pictured below)
I am open for any suggestions at this point. Thanks again.
My apologies. The pictures did not transfer over the first time. I reattached them in order