Issues with building a modified "Basic T" Civil Cell

Our client has a different design for it's side roads and entrances. Instead of a radius going from the mainline EOP to the entrance or side road EOP, there is a taper prior to the radius. Please look at the example I provided.

I followed the steps in order to create a civil cell based off the OpenRoads Technology - 07 Civil Cells training pdf. I was able to get my entrance EOP, and the tapered parts of the EOP in the civil cell, but I cant seem to get the radius. Sometimes I don't get the taper, nor the radius. All components do show up in the 3D model. 

I used a constant elevation of 10 for the white horizontal and vertical reference lines. I used project profile from element on the two tapered EOP lines, and then used quick profile transition for the two curves

Any help is greatly appreciated.

Here is a pic of the cell I designed.

Here is a pic of when I snapped to both access lines while creating the civil cell.

This is what I get when I want to place the civil cell. The curves do not show up, but they do if I were to do a Basic T with out the taper.

Parents
  • Hi
    I've tested it for you and function ,,Taper Arc Taper" works very well. Civil Cell creation requires some practice and experience, because single unconscious ,,click" could destroy your CC (every single ,,click" has to be related to reference element).

    In my opinion good practice is to test 2D CC first, and then continue work with profiles.

    BR
    Jan Posada

    Answer Verified By: Lawrence Oquendo 

Reply
  • Hi
    I've tested it for you and function ,,Taper Arc Taper" works very well. Civil Cell creation requires some practice and experience, because single unconscious ,,click" could destroy your CC (every single ,,click" has to be related to reference element).

    In my opinion good practice is to test 2D CC first, and then continue work with profiles.

    BR
    Jan Posada

    Answer Verified By: Lawrence Oquendo 

Children