MXRoad profile annotation problem

Hello Tibor,

1. Please Copy your whole project directory to a different drive and then check if still issue persists or not.

2. Please try to delete temporary files of CAD Engine through C:\Users\purva.lakde\AppData\Local\Bentley\MX\8.11\6efLaBqulA4XiYmokoZrmQ\prefs*.ucf and *.xml files (Path of my system).
Please make a note, first copy those file to a particular folder as a back then delete those file.

3. Please check with String Naming Convention as it should be turn ON while creating project and after launch MXRoad go to Tools> System Parameters > String Naming Convention> check ON.

Please let me know if still issue persists or not.

Regards,
Purva Lakde

Hello Tibor,

1. Please Copy your whole project directory to a different drive and then check if still issue persists or not.

2. Please try to delete temporary files of CAD Engine through C:\Users\purva.lakde\AppData\Local\Bentley\MX\8.11\6efLaBqulA4XiYmokoZrmQ\prefs*.ucf and *.xml files (Path of my system).
Please make a note, first copy those file to a particular folder as a back then delete those file.

3. Please check with String Naming Convention as it should be turn ON while creating project and after launch MXRoad go to Tools> System Parameters > String Naming Convention> check ON.

Please let me know if still issue persists or not.

Regards,
Purva Lakde

Hi Purva,

Thanks for your efforts.
It looks like, that I'v a centerline/master string geometry problem.

I'v just vreate a new alignment, and the annotation works great.

My problem is, that there is a road reconstruction, the centerline must follow the original geometry, so I'd spent a lot of time, to create centerline, more over now just the documentation process are missing. Better said only profile drawings are missing only.

So I need to go back to the old solution, in linemod.

Regards
Tibor

Hi Purva,

I have annotation problem while creating profile. It gives same RL for both existing and proposed ground.

I have tried all default tip file.

Thanks in advance!

Hello Santosh,

When you are annotating the profile using the "Geometric Annotation", make sure the "Exiting Level" has the ground model selected and for "Proposed Level" make sure the "Design Model" is select. Please see below the image for better understanding.