MICROSTATION SS4 PROFILE DOES NOT EXPORT TO NATIVE GPK

Hi,

I am InRoads SS4 user and I had some problems with exporting. The main reason was almost always geometry name, but here your problem is probably different. In InRoads we have to export DTM as separate file to display it on profile... There is no point in exporting ground profile line. I guess it works in the same way in GPK.

BR
Jan Poslada

Jan,

The geometry name is not the problem, we tried many different names. I am not sure what you are recommending to fix it. I have the DTM referenced into the design file. I need the existing ground profile for the Plan and Profile sheets. It is fine designing the proposed profile in the design file but it needs to be shown in the plans as well. The only way to place the profiles into sheets is to export to native and use the Design and Computation manager to draw the profiles.

Jan,

The geometry name is not the problem, we tried many different names. I am not sure what you are recommending to fix it. I have the DTM referenced into the design file. I need the existing ground profile for the Plan and Profile sheets. It is fine designing the proposed profile in the design file but it needs to be shown in the plans as well. The only way to place the profiles into sheets is to export to native and use the Design and Computation manager to draw the profiles.

Did you ever figure out the reason? I am currently having that same issue and can not figure it out.

Ryan,

I did not get it to work. I used the legacy tool Existing Ground Profile in Geopak Roads to draw the NG profiles once I had the alignments exported to native.