The natural ground profile of an alignment will not export to the native gpk. I have exported the alignment to the gpk without a problem. I have also opened the profile in another view and named the profile before attempting to export to native. What might be the cause of this issue? The gpk is not corrupt, I created a new gpk file and it still would not export.
Answer Verified By: Beebe Ray
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
I know this is old, but is there a solution to this issue? I am having the same problem. We think it could be due to the use of a reverse curve in the alignment That is the only thing that changed between an old alignment (no reverse curve) and a new alignment.
My issue was it that it didn't like the complex chain. Try using the Complex By Elements tool (A-1 under horizontal geometry) on the line you want to export.
I am also having the same problem, as others have identified in this thread. I am wondering if anyone has figured out the problem and a solution yet. Existing ground profile will not export out using the native export to gpk command. My gpk was not corrupt, and profile name was acceptable. Not sure why this is happening.