[IR Ss2] Plan and Profile Generator - Symbols and Details Issues

When using this tool, the North Arrow and ProjectWise Title Block work Great on the initial creation. But If I have to edit any particular sheet settings and then Regenerate the sheet, the original North Arrow is not deleted and a new one is added. And the original ProjectWise Title Block gets removed but no new one gets placed.

The duplicate North Arrow is not immediately noticeable unless one changes an offset for a Plan View but the missing PW Title Block is.

Parents
  • In troubleshooting this issue I think I may have missed something.  Please take a look at the attached video and let me know how our workflows differ and if I should test a different approach.

    I did not zoom into my Title Block information but you can see that it is still displayed.

    Thanks

    For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki



  • Well in my case, a similar workflow - changing an offset due to curves in the alignment making the horizontal layout too low or high, depending upon the curve direction, results in exactly what I describe - the original North arrow is retained and another North arrow is added while the Title Block cell is removed and not replaced.
    I will try to post a video when I get a chance.

    BTW, we configure the settings to make the sheets to align to the alignment, so the sheet coordinates are still true coordinates for the Plan View portion of the sheet.

    I don't know if that is how your demo is configured and if that might make a difference.

    Charles (Chuck) Rheault
    CADD Manager

    MDOT State Highway Administration

    • MicroStation user since IGDS, InRoads user since TDP.
    • AutoCAD, Land Desktop and Civil 3D, off and on since 1996
Reply
  • Well in my case, a similar workflow - changing an offset due to curves in the alignment making the horizontal layout too low or high, depending upon the curve direction, results in exactly what I describe - the original North arrow is retained and another North arrow is added while the Title Block cell is removed and not replaced.
    I will try to post a video when I get a chance.

    BTW, we configure the settings to make the sheets to align to the alignment, so the sheet coordinates are still true coordinates for the Plan View portion of the sheet.

    I don't know if that is how your demo is configured and if that might make a difference.

    Charles (Chuck) Rheault
    CADD Manager

    MDOT State Highway Administration

    • MicroStation user since IGDS, InRoads user since TDP.
    • AutoCAD, Land Desktop and Civil 3D, off and on since 1996
Children
No Data