I am working on an airport runway overlay and I have created overlay\stripping components for both milling and leveling. I want to display these areas on plan view so I can show where the milling and leveling will be needed. Is there a way to have inroads use the component and display it as a shape in plan view. I tried the surface\display\components and it will show pavement, but it will not show the overlay\stripping components.
If there is not a way to have inroads do that automatically, is there a way for me to have a report output the offset from center line to the start of leveling and another offset to show the end of the leveling section for each cross-section?
I appreciate any help!
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Does anyone have an answer to this???
This is an old thread but to close the loop, 2 examples of displaying levelling in plan view are presented at 00:25:25 and 00:26:10 of the milling Webinar
https://eventhub.bentley.com/wcc/eh/2541253/lp/4410882/answer-hour:-openroads-designer-%E2%80%93-tips-for-modeling-milling,-resurfacing,-stripping-and-backfill-volumes-(intermediate)
Vincent RAULT [Bentley]