Display reference string chainage in MXROAD dynamic sectionshttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/126267/display-reference-string-chainage-in-mxroad-dynamic-sectionsHi, Just a quick query with an answer that is no doubt staring me in the face; how do I display the section location in chainage relative to the master string rather than relative to where the sections start using dynamic cross sections? For exampleen-USTelligent Community 12RE: Display reference string chainage in MXROAD dynamic sectionshttps://communities.bentley.com/thread/384445?ContentTypeID=1Wed, 21 Sep 2016 12:49:04 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c13cf35d-3d7d-415a-ac0e-0062c6002a9aChris BellSi,<br /> <br /> That&#39;s the option I was using, I suspect my colleague was not. As the master string is typically in 5m increments I&#39;ll happily take that as a workaround for now, if you ever find a fix that would be a bonus! Thanks for your help, it was just a tiny thing that really bugged me and reduced the utility of dynamic sections.<br /> <br /> Chris.<div style="clear:both;"></div>RE: Display reference string chainage in MXROAD dynamic sectionshttps://communities.bentley.com/thread/384444?ContentTypeID=1Wed, 21 Sep 2016 12:40:12 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:629c8136-03f7-45a9-a969-a884c294466bSimon PeggChris<br /> <br /> OK, after digging a bit further, I can recreate the issue. It happens for me if the Section Location is set to SELECT Regular Chainage Intervals.<br /> If I pick chainange 350 - chainage 570 and have Select Regular Interval set to 10, then the scroll bar in the viewer is set to 10 for the first section and incrementing by 10 for each subsequent section.<br /> <br /> Can you check what you and your colleague have set for this option ?<br /> <br /> I can&#39;t find a workaround, so I guess I need to log a defect.<br /> <br /> Si<br /> <br /> Simon Pegg<br /> Bentley Civil Support<div style="clear:both;"></div>RE: Display reference string chainage in MXROAD dynamic sectionshttps://communities.bentley.com/thread/384431?ContentTypeID=1Wed, 21 Sep 2016 10:52:42 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:3bb204a1-dc70-4780-ab26-a9a3fd5a77a4Simon PeggHi Chris,<br /> <br /> I can&#39;t get this NOT to work.<br /> <br /> I pick a Design and ground model, go in to Dynamic Sections and set up a set of sections from chainage 270 to 540. The actual alignment is from 0-2000. <br /> When in the Dynamic Section viewer, the scroll bar along the bottom is from chainage 270 to 540. I&#39;ve tried it a few times with different chainage ranges, and also by doing the whole length first off, and it always puts the correct value in the scroll bar.<br /> <br /> I&#39;m happy to look at your data, you can send it to me simon.pegg@bentley.com<br /> <br /> Thanks<br /> <br /> Simon<br /> <br /> Bentley Civil Support<div style="clear:both;"></div>RE: Display reference string chainage in MXROAD dynamic sectionshttps://communities.bentley.com/thread/384268?ContentTypeID=1Tue, 20 Sep 2016 15:45:28 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:6324d19b-4cfd-4264-8b28-7b0b6bbd65e3Simon PeggHi Chris<br /> <br /> I&#39;ve just done it and its working as I would expect it.<br /> <br /> Let me hunt a bit further for the setting <br /> <br /> Simon Pegg<br /> <br /> Bentley Civil Support<div style="clear:both;"></div>