• State Verified Answer
  • Replies 4 replies
  • Subscribers 142 subscribers
  • Views 1781 views
  • Users 0 members are here

Not able to change design stage...it just hangs until it crashes GEOPAK SS4 (08.11.09.851)

Chuck K.
Offline

I am unable to change the design stage from 1 to 3, it just spins for 5 minutes and crashes. It worked before but then it wouldn't work so I created a brand new corridor file from scratch and I am still unable to change design stages.

Parents
  • 0 Offline
    Do you see this crash with 0 point controls and 0 parametric constraints and 0 attached elements? I don't know that I can help you, but it would probably be good to know whether it works if it's a perfectly fresh corridor.

    Also, try it with a different, perhaps bogus alignment and profile, just to see if that works. If it does work with a simple alignment and simple profile, it may be a problem with your design alignment and profile.
Reply
  • 0 Offline
    Do you see this crash with 0 point controls and 0 parametric constraints and 0 attached elements? I don't know that I can help you, but it would probably be good to know whether it works if it's a perfectly fresh corridor.

    Also, try it with a different, perhaps bogus alignment and profile, just to see if that works. If it does work with a simple alignment and simple profile, it may be a problem with your design alignment and profile.
Children
Communities
Support and Services
Training and Learning
Social Media