OpenRoads: Updating Cross Sections?

Power InRoads V08.11.09.878_SS4

Once I create a cross sections set in Microstation model in openRoads, is there a way to update cross sections such as display crossing or project features?

James

Parents
  • Hi James,

    Yes, you can update the cross sections for features and crossing features. Once you have the cross sections created, select the option "Annotate Cross Section" in the "Corridor Modelling" task (just besides 'Create Cross Section' option). Here you will find the "Features" category, you can select the "Crossing features" you want to display.

  • I'd actually like to know how to update previously drawn cross sections sets when the design changes. As it is, we have to run a new set, which creates a new model, which screws up all of our reference paths. And if (for some unknown reason) it doesn't create a new model, it seems that they don't come in at the same location, screwing up our references in a different way. I'm absolutely sure that I'm missing or unaware of some critical part of that process, but it HAS to be easier than this.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Reply
  • I'd actually like to know how to update previously drawn cross sections sets when the design changes. As it is, we have to run a new set, which creates a new model, which screws up all of our reference paths. And if (for some unknown reason) it doesn't create a new model, it seems that they don't come in at the same location, screwing up our references in a different way. I'm absolutely sure that I'm missing or unaware of some critical part of that process, but it HAS to be easier than this.

    MaryB

    Power GeoPak 08.11.09.918
    Power InRoads 08.11.09.918
    OpenRoads Designer 2021 R2

        

Children