Sheet design

The only tool InRoads has for generating sheet information would be the Plan and Profile Generator where you can use geometry/alignments to control a plan location and utilize its profile to generate sheets.  

http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/10564

As for placing a cell or graphic and utilizing that for the creation of sheet information, this sounds similar to an option coming in the OpenRoads Designer CONNECT program to place a named boundary.  This would be future functionality.

Thank you Chris. Not the answer I was hoping for. Instead, I am using named views and placing them on my sheet models. Plan view labeler isn't functional though when the sheet is setup like this.

I'd recommend you use the "AutoCAD" approach.

• Create a sheet file that contains a (2D or 3D - your choice) design model and a 2D sheet model
• Attach any reference files needed to display the detail areas to the design model
• Create your saved view(s) here, making sure to rotate the view(s) so the saved view can be used un-rotated when referenced to the sheet
• Place any annotation needed for the sheet that must use the design file coordinates in the design model, using the saved view orientation
• Attach the saved view to the sheet model at whatever scale is needed

I'd recommend you use the "AutoCAD" approach.

• Create a sheet file that contains a (2D or 3D - your choice) design model and a 2D sheet model
• Attach any reference files needed to display the detail areas to the design model
• Create your saved view(s) here, making sure to rotate the view(s) so the saved view can be used un-rotated when referenced to the sheet
• Place any annotation needed for the sheet that must use the design file coordinates in the design model, using the saved view orientation
• Attach the saved view to the sheet model at whatever scale is needed