https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/129016/widening-the-roadHi! I want to make widening the road. I have basis axis and want to make a transition from width1 at station KM1 and end to width2 at station KM2. Start and end shoud be parallel to basis axis. Transition make with two Radiuses with equal tangentsen-USTelligent Community 12https://communities.bentley.com/thread/393846?ContentTypeID=1Thu, 01 Dec 2016 11:24:34 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:4a00ad11-d7be-4122-8efc-0f9882708f56Mark Marnell<p>I am more a MX user, but I used PowerCivil 8.11.9.878 for the following - &nbsp;is this what you are trying to achieve? The red arrow points to the lane position W1, and the yellow arrow points to the lane position at W2.&nbsp;</p> <p>I used OpenRoads horizontal tools to create the data, and then exported the data to ALG. I am not sure if these tools are available in InRoads v8.11.7.536, but I wanted to check this is the required result. Note the 25m tangent in the middle can be any length you specify.</p> <p>If this is not what you want, please show a diagram to explain the situation better.</p> <p><a href="/cfs-file/__key/communityserver-discussions-components-files/5922/Align.png"><img src="/resized-image/__size/940x0/__key/communityserver-discussions-components-files/5922/Align.png" alt=" " /></a></p> <p></p><div style="clear:both;"></div>https://communities.bentley.com/thread/393836?ContentTypeID=1Thu, 01 Dec 2016 09:22:53 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:9ad55ce5-3d24-4dd4-b2f0-332ca8ca72a0MSoHi<br /> InRoads V81 V08.11.07.536<div style="clear:both;"></div>https://communities.bentley.com/thread/393689?ContentTypeID=1Wed, 30 Nov 2016 07:10:23 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:0c56441f-3388-4b05-b213-2e667d94a2f1Mark MarnellWhat product are you using?<div style="clear:both;"></div>