Key-in and Accept-(Left Buttom)Mouse problem

Question

Hi, 
 I changed my InRoads Ss2 to PowerInroads-Ss4 and I have a lot of trouble of the configuration. 
 1. When I use Key-In to input an elevation that doesn't work. PowerInroadsSs4 can not take the value of the key-in. 
 2. When I click left-mouse to Accept a graphic element to the Geometry or something else that doesn't work. 
 I installed PowerInroads-Ss4 for nothing there is no difference with InRoads Ss2 but problems. Do I have advantages with PowerInRoadsSs4 than InRoadsSs2? 
 Thanks a lot,

Holly Herring · Answer

Hi Mishu, 
 
1. I was able to reproduce what you are seeing in the latest version 08.11.09.878. I filed this as defect 651638: Evaluation > Hydrology and Hydraulics > Pass through Contours > cannot key in elevation. In the meantime you could use this as your workaround... Go to Surface > View Surface > Contours. Under the Main tab set the interval to 1.0. Under the Advanced tab, set the High and Low elevation to the same elevation to display a contour at that elevation. 
 
2. Could you provide me with a specific example where the mouse isn't functioning like you would expect?

Holly Herring · Answer

You can change the accuracy within MicroStation>Settings>Design File>Working Units - Accuracy. You will be able to use millimeters after you do that.

Holly Herring · Answer

I filed this under Enhancement 652668: Surface > View Surface > Contours, ability to display contours at .001 interval.