RE: Power InRoads SS2 [Civil Design Forum]

So here is where I am this morning and a condensed file version of what I see.
 
I cannot figure out how to print out and compare the settings:
The error occurs with the project defaults.  Both of the xin file I am sending you should be (and seem to work for others correctly in InRoads SS2.  However, they give different results in Power InRoads.  See the attached Geometry Reports.
Note:  My coworker gets the correct geometry regardless of the .xin he chooses in InRoadsSS2.
The error is so small (~1ft:0.99996 ft) that it is difficult to catch unless you have a long alignment. 
 
Let me know if you can see anything…
 
Thanks so much!
 
 
From: caddcop [mailto:bounce-57144964-779f-4c4e-ac49-c13715c2f939@communities.bentley.com]
Sent: Monday, January 30, 2017 3:18 PM
To: CivilDesign@communities.bentley.com
Subject: RE: Power InRoads SS2 [Civil Design Forum]
 

 

Description: /cfs-file/__key/communityserver-discussions-components-files/5922/6082.image001.png
Message from Bentley Communities
Description: /cfs-file/__key/communityserver-discussions-components-files/5922/6082.image002.jpg
 

What about if files are referenced? If they line up, try turning off True Scale and see if a ratio appears on one of the two scale factors. That would indicate some type of working units issue.

We also sometimes have labeled grid coordinates in two files using grid lock with a 50' grid unit and compared how not only do the files align but how the grid coordinates align.

View online

If you encounter issues clicking "View online", check here.

 

You received this notification because you are subscribed to the forum.  To unsubscribe from only this thread, go here. To unsubscribe from a forum, please see this note.

Flag this post as spam/abuse.

Description: http://communities.bentley.com/notification/read?NotificationId=7794e999-6ec4-4bd7-adfe-906e0d086efd
 
https://communities.bentley.com/cfs-file/__key/communityserver-mailgateway-mailroom-forumshandler/c6adc12c91a84d77b4fbbe369c88188c/PIR_5F00_ERROR.ALG

PIR_ERROR.ALG