OpenRoads and schedule simulation

RE: OpenRoads and schedule simulation

Mark Shamoun — Tue, 14 Feb 2017 08:21:20 GMT

Here you go Adam:

communities.bentley.com/.../ClipModel_5F00_v2.mvba

RE: OpenRoads and schedule simulation

Adam Wieczorek — Tue, 07 Feb 2017 06:52:25 GMT

Thanks mark. I will appraciate you posting mvba here.

RE: OpenRoads and schedule simulation

Mark Shamoun — Mon, 06 Feb 2017 22:21:50 GMT

Hi Adam, we are currently splitting our corridors up into 100m sections due to the digital engineering requirements for our current project.

Our current workflow involves creating a new 3D only dgn, referencing the Default-3D models only with no nesting and then merging into master to get meshes and strip all civil data.

We had a few issues using clip model - the biggest being that it warps the meshes occasionally if your split boundary cuts the mesh along is plane without an overlap. We have since also updated it to save the dgn on every clip as a crash would mean all clipping would have to be redone and functionality to skip the clip if the group exists (vs. quoting the macro).

I can post up a copy if the updated clip model mvba if you want.

RE: OpenRoads and schedule simulation

Adam Wieczorek — Fri, 03 Feb 2017 18:28:19 GMT

thanks, I was using this vba for SS2 models. Had no idea it would work with civil geometry and openroads meshes

RE: OpenRoads and schedule simulation

Sanders Thomas — Fri, 03 Feb 2017 13:53:45 GMT

Hi Adam,

You are correct in that meshes produced with OpenRoads corridors are contiguous. The ClipModel.mvba was developed to assist with Schedule Simulation. Please see the link below.
communities.bentley.com/.../models-for-schedule-simulation

Thanks,
Sanders