Point control by horizontal alingnment in Road Designer

You may want to examine how those points are constrained. I suspect that the point control is doing exactly what you asked it to do, but that the way the points relate to each other is not reacting the way you expect.

Use the Test Point Control > Test Horizontal Control
As you move your cursor, its horizontal location will push or pull the point's horizontally, while the vertical location will still be driven by the remaining constraint. Sometimes, the result is unexpected.
Also, if an alignment doubles back such that the point control has two options, it frequently decides to use the option not wanted.

Test horizontal control works. Problem is if Point is controled by alignment . If orthogonal line to alignment crosses alignment somewhere controled poin has wrong location. How to resolve?

Test horizontal control works. Problem is if Point is controled by alignment . If orthogonal line to alignment crosses alignment somewhere controled poin has wrong location. How to resolve?

MSo, how many Point Controls do you have assigned in this model? It looks like at least 4 from the graphic that you posted. And it might help to know what the template is 'supposed' to look like, because it's obviously getting yanked and distorted by the various Point Controls. And MaryB is right about really understanding the Point Constraints when you have Point Controls assigned. And Chuck's suggestion to test the Point Controls is good, but you can't easily test the template reaction if you have a lot of Point Controls assigned to a single Template.

And there is something really odd going on because it appears that the left side of the Template is running at 'zero' offset from the Corridor path, but the Plan view doesn't look like that. You are going to have to provide more insight into how you have your model set up before that can be diagnosed properly.