Point control by horizontal alingnment in Road Designer

My guess is the template is finding the alignment on the other side of the roadway since the shape of the alignment is a U shape. Point controls will move a point to an alignment no matter how far away they exist and sometimes the program gets confused when an alignment exists twice withing a cross section. It happens all the time with loop ramps as well.

You will have to split the alignment up in to two halves. I would suggest a split at the blue line in your plan view picture.

Marc

My guess is the template is finding the alignment on the other side of the roadway since the shape of the alignment is a U shape. Point controls will move a point to an alignment no matter how far away they exist and sometimes the program gets confused when an alignment exists twice withing a cross section. It happens all the time with loop ramps as well.

You will have to split the alignment up in to two halves. I would suggest a split at the blue line in your plan view picture.

Marc

It means that template looks control line (alignment) from right to left side.
Yes I can create a lot of alignments (split into one or more pieces). But for me it is as bug to fix in next version.
Big thanks for Marc and all!