OpenRoads Designer Export to ALG

RE: OpenRoads Designer Export to ALG

Mark Marnell — Fri, 28 Feb 2020 10:57:50 GMT

Line 2 shows the LandXML version = 2.- Are you absolutely sure there is an Active Profile on the alignment (I just have to check.)?

RE: OpenRoads Designer Export to ALG

Siva Allam — Thu, 27 Feb 2020 20:17:19 GMT

And fortunately, above attachement label the version as 1.0 though I used 2.0 for output

RE: OpenRoads Designer Export to ALG

Siva Allam — Thu, 27 Feb 2020 20:15:43 GMT

communities.bentley.com/.../5153.CL_2D00_ACCESS-TRACK-1.xml

Hi Mark,

In fact my alignment got vertical too but unfortunately even with 2.0 version its not picking up for some reason.

RE: OpenRoads Designer Export to ALG

Mark Marnell — Thu, 27 Feb 2020 07:18:22 GMT

If you notice, you do not have anything in the <Profile /> part of the XMl (LINES 75 AND 102) - so no profile data.

I have just tried it for one alignment, and the result contains the profile data (line 50). See attached. I used version 2.0 and checked on 'Only Active Profile' to get the attached. ORD 2020 R1 (10.0.8)

<?xml version="1.0" encoding="utf-8"?>
<LandXML xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.landxml.org/schema/LandXML-2.0 http://www.landxml.org/schema/landxml-2.0/LandXML-2.0.xsd" version="2.0" date="2020-02-27" time="07:12:46" xmlns="http://www.landxml.org/schema/LandXML-2.0">
	<Units>
		<Metric areaUnit="squareMeter" linearUnit="meter" volumeUnit="cubicMeter" temperatureUnit="celsius" pressureUnit="HPA" />
	</Units>
	<Application name="OpenRoads Designer" version="10.08.00.88" manufacturer="Bentley Systems, Inc." manufacturerURL="http://www.bentley.com" />
	<CgPoints />
	<Alignments>
		<Alignment name="GeomBL" length="712.43056285395244" state="proposed" staStart="0">
			<CoordGeom name="GeomBL" state="proposed">
				<Line length="98.586800327290192">
					<Start>7088.6546520671609 7814.5510125352121 0</Start>
					<End>7123.7677978295687 7906.6728025386683 0</End>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</Line>
				<Spiral spiType="clothoid" length="85.950511568627448" rot="cw" radiusStart="INF" radiusEnd="510">
					<Start>7123.7677978295706 7906.6728025386683 0</Start>
					<PI>7144.1837568243473 7960.2354966920802 0</PI>
					<End>7152.1038607074306 7987.7893637499765 0</End>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</Spiral>
				<Curve crvType="arc" rot="cw" radius="510" length="354.97035366794461" chord="347.84847805287268">
					<Start>7152.1038607074306 7987.7893637499756 0</Start>
					<Center>6661.9508028757446 8128.6793204475616 0</Center>
					<End>7128.4284560381111 8334.8312040191904 0</End>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</Curve>
				<Spiral spiType="clothoid" length="85.950511568627448" rot="cw" radiusStart="510" radiusEnd="INF">
					<Start>7128.4284560381102 8334.8312040191904 0</Start>
					<PI>7116.8396645312378 8361.0541624101352 0</PI>
					<End>7089.338555106905 8411.3479251156568 0</End>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</Spiral>
				<Line length="86.972385721462686">
					<Start>7089.3385551069068 8411.3479251156568 0</Start>
					<End>7047.6119760827578 8487.6570889233171 0</End>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</Line>
			</CoordGeom>
			<Profile>
				<ProfAlign name="GeomBL">
					<PVI>-1.4967699248753721 63.248325970368008</PVI>
					<ParaCurve length="144.79621563999754">233.84888450340151 59.356680923390151</ParaCurve>
					<ParaCurve length="200.55442367789664">451.14615020411827 69.041695542961818</ParaCurve>
					<PVI>712.43056285395244 52.136627535510144</PVI>
					<Feature>
						<Property label="style" value="Alignment\Geom_Baseline" />
					</Feature>
				</ProfAlign>
			</Profile>
		</Alignment>
	</Alignments>
</LandXML>

RE: OpenRoads Designer Export to ALG

Siva Allam — Wed, 26 Feb 2020 21:27:11 GMT

communities.bentley.com/.../CL_2D00_ACCESS-TRACK-1.xml

Hi Mark,

Yes it does, unfortunately, its not working....I have uploaded an xml file just in case you want to look at. Thanks for the help Mark

RE: OpenRoads Designer Export to ALG

Mark Marnell — Wed, 26 Feb 2020 07:15:52 GMT

Does the vertical profile have a name? I seem to remember something about that being required for export to landXML.

RE: OpenRoads Designer Export to ALG

Siva Allam — Wed, 26 Feb 2020 00:17:52 GMT

Hi,

i have tried doing this, but unfortunately it only imports horizontal, not the active vertical.

RE: OpenRoads Designer Export to ALG

Beebe Ray — Wed, 31 May 2017 13:09:31 GMT

You would export the geometry to a landxml file and import that into InRoads, GEOPAK, or MX, etc.

communities.bentley.com/.../35098.video-export-geometry-to-landxml