Hello,
I am looking to create an Isopach that specifically colour codes the bands not in level relative to a survey but + or - relative to the existing ground on the new proposed design. i.e a large bund would be 5.0m + fill.
Could anyone help in getting this working. I am using SS4 MXRoad Suite
1. Create an isopachyte traingulation (TRIANGLE option 962 or 965). The levels in this triangulation are height differences between the two surfaces.
2. Use DRAW option 870 to colour band the isop triangles (noting that the levels given are really the height differences). Another option would be to use Surface Analysis to do the colour banding.
Answer Verified By: Jim Lockwood