Key Stations Cross Sections no bueno

RE: Key Stations Cross Sections no bueno

Holly Herring — Thu, 27 Jul 2017 14:50:19 GMT

The cross sections are not tied to the design model for SS4. There is a Dynamic Cross Section view in SS4 that allows you to dynamically see changes from the design model. However, if you cut cross sections, makes changes in your design, you will have to recreate the cross sections. Which is why saving off the custom cross sections is import. OpenRoads Designer has dynamic plan/profile/cross-section sheets. So if you make a change in your design it will be reflected in your sheets, and you no longer have to recreate them.

RE: Key Stations Cross Sections no bueno

Chris Munoz — Thu, 27 Jul 2017 14:46:12 GMT

Holly,

Once I run cross sections thru the Create Cross section dialog box and they are placed in a model are those cross sections then independent of the corridor, alignment, and profile? I would have thought that once I run them that I could then go modify my corridor or profile and have them update in the model automatically. But so far each time I have made changes to my corridor or alignment I have had to re-run the cross sections again to get the modifications to show up. Is this something that will change in a future update or am I missing a step?

Thank you

RE: Key Stations Cross Sections no bueno

Holly Herring — Fri, 21 Jul 2017 14:53:30 GMT

Yes, they are different. You will have to manually add in stations that you want as cross sections that are not apart of the 50' interval. So if you have key stations in your corridor, you will have to manually type in those stations within the custom dialog box. You should only have to do it once if you save it off.

RE: Key Stations Cross Sections no bueno

Chris Munoz — Fri, 21 Jul 2017 14:44:17 GMT

Holly,

Thank you for the reply. That is what I wanted to know. I can set a Station Range to drop cross sections at 100' intervals but if I want Key Stations I will need to add those in manually thru the Custom folder in the cross section dialog box.

So the Key Stations you set in the corridor objects are different from these key stations? Because I set key stations thru the corridor objects but when I got into the Custom folder in the Create cross section dialog box I did not see any of the key stations I set thru the corridor.

Thank you

RE: Key Stations Cross Sections no bueno

Holly Herring — Fri, 21 Jul 2017 14:36:48 GMT

Hi Chris,

You can have them all in one model if you use the Custom cross section dialog box.

Notice that I have a Station Range to run cross sections every 100' across my entire alignment. Then, I added cross sections at specific stations. I can save that so that I don't have to recreate it every time I run the tool. This is how you add key stations. Currently, the software does not automatically cut cross sections at key stations that you created. You add them through the custom cross section dialog. When it is run as shown above, they all show up in one model in order of rising station numbers.

Holly

RE: Key Stations Cross Sections no bueno

Chris Munoz — Fri, 21 Jul 2017 14:12:57 GMT

What I found out was if I have cross sections cut at Sta 1+00, 1+50, 2+00...etc it will cut those fine. But if I have a driveway or intersection at 1+73. It will not add that cross sections automatically. It will not add 1+00, 1+50, 1+73, 2+00...etc

When I run the create cross section command with cross sections at 50' intervals it adds those fine and creates one model for those, but then when I create cross sections with key stations it put those cross sections into a separate model. I would like to be able to have all of my cross sections at 50' intervals as well as the cross sections at key stations run automatically and put in order into one model.

Thank you

RE: Key Stations Cross Sections no bueno

Holly Herring — Fri, 21 Jul 2017 14:01:23 GMT

Hi Chris,

This can all be done with the Custom Cross Sections dialog. You would do the 50' intervals with the Type set to Station Range. You input the start/stop station, 50' interval, offsets, and then click Add. Then change the Type to Perpendicular to enter in the Key Stations and Add them. After, do a Save As to save this custom cross section set so that you do not have to recreate it every time you run the command. You simply would import what you saved to recreated it.

Holly