https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/139211/parcel-and-right-of-way-creationI’m a long time C3D user and have limited experience using PowerGeopak SS4 for design but need to setup an existing right-of-way and parcels. These will be used for takings later as the design proceeds. What I have currently figured out in PowerGeopaken-USTelligent Community 12https://communities.bentley.com/thread/421818?ContentTypeID=1Wed, 02 Aug 2017 17:49:00 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:882a73b2-1fe5-4684-9e10-b5fe13c00362Robert Watson<p>Yes that is what I was referring to. &nbsp;Since I&#39;m new to PowerGeopak I&#39;m attempting to find the best way to perform the task of creating ROW&#39;s and parcels. &nbsp;Going through some of our DOT training material now, hopefully that will help.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/421775?ContentTypeID=1Wed, 02 Aug 2017 13:27:21 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:7d613342-f697-48b2-afbd-d25e5f4e8eb0Nico Roman<p>Are you talking about once the parcel is stored in cogo, you want to plot it using&nbsp;a symbology for one side and different symbology on another side of the same parcel?</p> <p>That is not possible. You would need to change the level using microstation after plotting the parcel.</p> <p><a href="/products/road___site_design/w/road_and_site_design__wiki">https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki</a></p><div style="clear:both;"></div>