Frequent Random Corridor Corruptions

RE: Frequent Random Corridor Corruptions

Wesley Nyberg — Fri, 18 Aug 2017 19:59:01 GMT

Check out this it should help. Basically I get corrupt corridors all the time, multiple times through out the day. Usually if something is acting weird I use the CIVIL DISPLAY BROWSER to repair the relationships and that seems to always work. Let me know if that helps.

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/117670/open-cross-section-model-doesn-t-work-in-heads-up-prompt

RE: Frequent Random Corridor Corruptions

Keith Kennon — Fri, 18 Aug 2017 17:53:54 GMT

I had created an ALL_CORRIDORS.dgn drawing. Then, I used nesting to assign an external reference to one of the corridors from one of the other corridors. When one of the corridors became corrupt, I replaced the drawing with a new one by the same name. But then other drawings that may have referenced that became corrupt. And the dominoes started falling.

RE: Frequent Random Corridor Corruptions

Keith Kennon — Fri, 18 Aug 2017 17:33:16 GMT

I have 27 corridors in my project. I am experiencing corruptions now every time I open a corridor drawing. I cannot keep starting these corridors over every time I open them. There has to be a fix for this.

RE: Frequent Random Corridor Corruptions

Chris Key — Fri, 18 Aug 2017 13:25:10 GMT

Generally this is just a corrupt corridor (not sure of the reason) but we don't typically see this with the latest builds. What is the exact version of the product you are using? Are you on 08.11.07.845 or 08.11.09.872, or are you on the latest 08.11.09.878?

Can you attach the DGN so I can try looking at the dgn to see if there is disconnect in the civil model which we can repair?