I am trying to connect a ramp to mainline (using the ramp designer tool) that is "below grade", but continue to get the below result where the mainline disappears under the terrain image. Any workflow help to resolve this result? The mainline template end condition doesn't see the ramp end condition as well.
could you attach your files here and a workflow? have you seen this video?
https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/27771/video-openroads-conceptstation-place-and-edit-ramps
For more information about the Road and Site design tools, visit the Road and Site design WIKI at: http://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki
Answer Verified By: brian connor
Thank you, after playing with it a bit, I have found where playing with the gore terminal connection and then turning on the terrain level fixes the visual, and the design can now be seen. End conditions of two roadways don't find each other though. Is this normal at this time? I have provided the file in the below link.
Could I also ask your opinion on how you might construct a "folded diamond, or ParClo 2 quadrant interchange"? I have roughly laid in the design in the file, and would like to hear if this can be done easily, or if a template build of some sort would need to occur?
Box files
Brian, as you mention, currently ECs of 2 corridors will not clip to each other, but we are currently working on a solution that we hope to have available for our next release.
A folded diamond can be kinda forced in with a stop loop ramp combined with a simple diagonal ramp, but if you want the intersection with the local street to be a proper 2-way leg which breaks up into the 2 separate ramps, it will require some finessing with an intersection between the 2 ramps.