https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/140633/drawing-annotating-cross-sectionsDue to a client upgrading their software I have had to convert a corridor I created in SS2 corridor modeling to SS4. Everything seems to be running fine in plan view but I&#39;m running into a couple problems with regards to the cross sections. 1. Whenen-USTelligent Community 12https://communities.bentley.com/thread/426485?ContentTypeID=1Mon, 11 Sep 2017 13:46:30 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:5df6d440-1d87-4176-b04a-9f690748a49eHolly Herring<p>Hi Nate,</p> <p></p> <p>Are you working a 3D dgn or a 2D dgn? Often times users will see what your describing in your number one if they have horizontal elements in their 3D model. I would inspect your model to see if you have elements at this elevation. As far as number two, did you make sure that you had the cross section set model selected? If you attach your files, I will look to see what you are describing.</p> <p></p> <p>Holly</p> <p></p><div style="clear:both;"></div>