MXRoad cross section how to add object or curb etc.

I wouldn't use MX - use the Openroads tools and apply a linear template to a 3d element.

The first thing you need to do is import your MX strings into the Microstation environment and then apply a linear template.

Then use the following

Thanks,

But its not possible using mx tool do that?

And when convert road stings to openroads how about the widening lane. How to tie template to lane?

Andrew

Very difficult and awkward to do it using MX string modelling.

With regards to fastening a template to a lane you would do it using point controls, however I think you need to start taking a look at the Bentley Learn server and make yourself fully aware of all of the capabilities of the Openroads tools. The way I have suggested is very quick and easy. You have to realise that MX string modelling will go away shortly as it isn't support in the new connect edition and it isn't the way forward.

Andrew

Very difficult and awkward to do it using MX string modelling.

With regards to fastening a template to a lane you would do it using point controls, however I think you need to start taking a look at the Bentley Learn server and make yourself fully aware of all of the capabilities of the Openroads tools. The way I have suggested is very quick and easy. You have to realise that MX string modelling will go away shortly as it isn't support in the new connect edition and it isn't the way forward.