How to Add or follow super elevation to Civil Cell with Turn Lanehttps://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/142078/how-to-add-or-follow-super-elevation-to-civil-cell-with-turn-laneI created a civil cell with turning lane. I added the civil cell to the corridor which has a super elevation. When I created a cross section of the corridor, the widen\turning section of the civil cells doesn&#39;t follow the super elevation of the corridoren-USTelligent Community 12RE: How to Add or follow super elevation to Civil Cell with Turn Lanehttps://communities.bentley.com/thread/430816?ContentTypeID=1Tue, 17 Oct 2017 13:08:47 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:26c07882-8573-48e0-abb2-b24738cbbb14Sijan Shrestha<p>Thank You. I will give that a try.</p><div style="clear:both;"></div>RE: How to Add or follow super elevation to Civil Cell with Turn Lanehttps://communities.bentley.com/thread/430772?ContentTypeID=1Tue, 17 Oct 2017 07:31:49 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f2671b33-39b6-4dc6-b8f3-5430555c1ae3Mark Marnell<p>One method would be to have a parametric constraint on the lane template used in the Civil Cell (e.g. Lane_Slope) which you could then use to alter the slope from a start chainage/station slope to an end chainage/station slope.</p><div style="clear:both;"></div>