In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

RE: In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

rclerk — Wed, 24 Oct 2018 14:55:32 GMT

The issue seems to be as described above. Once civil accudraw has been toggled on once, regular accudraw can no longer be toggled on even if civil accudraw has been disabled. You have to exit out of the file and reopen. See video below:

communities.bentley.com/.../accudraw.mp4

RE: In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

Nico Roman — Wed, 24 Oct 2018 14:38:44 GMT

you need to Disable CivilAccudraw then you can toggle accudraw back on.

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/142177/in-openroads-designer-how-to-enable-the-basic-microstation-accudraw

RE: In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

rclerk — Wed, 24 Oct 2018 14:35:18 GMT

I am currently using update 3 of ORD and do not have the ability to toggle back and forth in the same work session. Is this still pending resolution or has it been addressed in update 4?

RE: In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

Mike Madrid — Wed, 01 Nov 2017 04:41:00 GMT

and Vice-Versa

RE: In OpenRoads Designer, How to enable the basic Microstation AccuDraw?

Nico Roman — Wed, 18 Oct 2017 15:32:33 GMT

Chen

thank you for bringing this up. I can reproduce the problem and I filed a defect. Once you activate Civil Accudraw, the regular Accudraw will not activate. You need to exit and come back in for it to work again.

Defect 768728:Civil Accudraw Activation causes Regular Accudraw to not work anymore