Power Inroads process persisting after closing?

RE: Power Inroads process persisting after closing?

Marc Blancher — Fri, 02 Oct 2020 11:53:50 GMT

I had the same issue and it was related to the Connect Advisor, see this post: https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/203679/openroads-designer-doesnt-close-tasks-stay-open-in-task-manager-that-have-to-be-forced-closed

RE: Power Inroads process persisting after closing?

Andrei Chiriac — Fri, 02 Oct 2020 11:45:20 GMT

Same problem here with OpenRoads Designer Connect Edition - 2020 Release 2

RE: Power Inroads process persisting after closing?

Eric Chappel — Thu, 20 Aug 2020 14:49:32 GMT

I have an open support ticket, and have supplied a simple .ma that illustrates the problem, but as yet have had no response as to what can be done about it. For our customers it represents a real problem because they are trying to write to hundreds or even thousands of DGNs in a series of batch processes, typically overnight or over a weekend. Sitting there and killing processes with Task Manager isn't practical for them.

RE: Power Inroads process persisting after closing?

MaryB — Thu, 20 Aug 2020 14:37:59 GMT

I never found a solution. I just ended up making a habit of going to the Task Manager to end the process.

RE: Power Inroads process persisting after closing?

Yordan Valkanov — Thu, 20 Aug 2020 01:31:41 GMT

I have the same problem with Openroads and PowerInroads SS2

RE: Power Inroads process persisting after closing?

Eric Chappel — Thu, 04 Jun 2020 11:07:50 GMT

We are seeing the same thing using Power GEOPAK. So is our customer and it is causing batch processes to hang.

RE: Power Inroads process persisting after closing?

MaryB — Thu, 16 Nov 2017 17:32:23 GMT

Close means to close files. Exit means to Exit the program. Or am I confused?
I just go to File -> Exit. Is there something else I need to do before that?

RE: Power Inroads process persisting after closing?

Sanders Thomas — Thu, 16 Nov 2017 15:05:04 GMT

Hi Mary,

Do you "Exit" or "Close" InRoads? Exit should end the process. I'm not familiar with GEOPAK doing this frequently but I am researching for you.

Thanks,

Sanders