I have 3 stacked terrain models (1. Existing Ground, 2. Topsoil Stripped and 3. Mountain) and a corridor cutting through all three terrains. When calculating End-Area Volumes, is it possible to automatically calculate/devide the Cut volume into these three soil-types, based on the terrain-models?
Yes. If you assigned a feature definition to substrata Terrain Model such as Existing_Rock_Surface then it is automatically set as "volume option=substrata". Then in End Area volume it is computed as such and if you use Earthworks_Quantities.xsl you will find required quantities.
You can also check and change the type of surface in the End Area Volume panel under "Classification"
Answer Verified By: Rikke Wittendorff
This will work in SS4 but not with ORD as for ORD there is no tool to calculate earthworks by End Area Volume method.
Best,
Adam
OpenRoads Designer 2023 | OpenRail Designer 2023
It is true, that I don't have the Earthworks tool, but I do have the Earthworks-report, so by changing the Feature Definition style, it was actually possible to do it with End Area Volumes. (Although I used the "Roadway Component Designer Quantities Summary.xls" instead of the "EarthworksQuantities.xls", as it gives a list of total volumes.)
Hi Rikke,
Just like Adam said, I do not find any tables or tools to report the earthworks excavation volume in OpenRoads Designer update 1, so this is big trouble!
I know this works well in Power Inroads ss 4. but not in ORD, it is a pity.
see the following screebshot:
Ah, my mistake. I'm completely new to this program and was sure I had ORD... But I think you're right, that it is instead the Power Inroads I have (or PowerCivil..?).. It's all very confusing with all the names and versions.
Big trouble for ORD indeed though... It seems like an essential function, when designing roads..
Fortunately there will be just ORD in some time, all road design software is merging and there will be no confusion... I only hope that ORD would be capable of doing all cool stuff that all merging software can do with en ease. EAV is just to name one.