ORD Section exports?

RE: ORD Section exports?

Benzi Papo — Sun, 01 Mar 2020 06:14:13 GMT

Here is an explanation of Reference Visible Edge Display:

https://communities.bentley.com/products/microstation/b/microstation_v8i_blog/posts/newin-ss3-cached-visible-edge-display

Also a configuration variable can be set here:

RE: ORD Section exports?

Adam Wieczorek — Wed, 07 Feb 2018 08:36:55 GMT

I had no annotations on this XS. However you will get them to "none" on export. In MSTN CE updt 7 there was no need to set the Visible Edges to Cached in Reference Dialog. Note, I exported XS to dgn and not dwg.

Every XS drawing's coordinates are set in the way that CL is at X=0.0 (Offset 0.0) and at Y=CL elevation so you can annotate this with normal XYZ tools. I will play with text favs maybe there is a way and we can avoid dropping the labels. Contractor requires all XS in a single drawing model and layput Top to Bottom - agian paingul to achieve with ORD.

RE: ORD Section exports?

Mark Shamoun — Wed, 07 Feb 2018 08:16:48 GMT

It's actually in the references dialog to the right.

Regarding the settings, i haven' t really played with them but seem to just be for symbology.

In MS are you getting the point label "NONE" change for the cross sections as well?

RE: ORD Section exports?

Adam Wieczorek — Wed, 07 Feb 2018 08:12:18 GMT

Thanks Mark. Very helpful tips you shared. I wish it would better, static XS are still needed, especially when sharing them with third parties.

I finally managed to export XS with Microstation CE Update 7.

Also with ORD CE Updt 2 I can not display settings for Visible Edges of 3D attachments. It works in MS CE updt 7 but nothing pop-ups in ORD.

RE: ORD Section exports?

Mark Shamoun — Tue, 06 Feb 2018 12:29:38 GMT

Hi guys,

Apologies for the delay, I haven't had a chance to have another look at cross sections for a while as I was exhausted from trying to get them converted. I think the Dynamic nature of these is absolutely fantastic, but unfortunately we need an easy way to get static versions dumped out for those of us who have drafting done in other platforms.

It seems that the source of the issues is the Reference Visible Edges being set to "Dynamic". This issue can be resolved if the reference setting is set to "Cached" (doesn't seem to matter what Cache Sync mode is set).

Now as long as "Merge Visible Edges of 3D Attachments" is set in Export options the surfaces seem to come out okay.

The Steps that work for me for Cross sections are:

1. Change Reference Visible Edges to "Cached"

2. Select all Text Nodes and drop Complex (& Application Elements?)

3. Export to DWG with all Reference settings set to Merge and "Merge Visible Edges of 3D Attachments" turned on

Hope this works for you guys...

RE: ORD Section exports?

Adam Wieczorek — Tue, 06 Feb 2018 10:36:03 GMT

I get the same result. Mark Shamoun can you advise how to get 2D drawing visible edges only? J have that setting checked in but get the same results as Krzysztof.

RE: ORD Section exports?

Krzysztof Burdziel — Thu, 18 Jan 2018 13:10:06 GMT

Hi Mark,

I'm also playing with exporting ORD sections and was quite successful with long section (I was exporting selection set and went smoothly) but was stuck with cross section. Below is an result of export to dwg - it looks like complete 3D model is merged rather than section cut only. Any idea? My settings are as per your suggestion, I'm exporting to dwg 2013-2017. I would appreciate any advice. Thanks.

RE: ORD Section exports?

Nico Roman — Tue, 16 Jan 2018 18:26:25 GMT

Yes. I can reproduce this and I filed a defect. thanks

d 806813

RE: ORD Section exports?

Mark Shamoun — Tue, 16 Jan 2018 05:01:39 GMT

Please note this is a solution to cross sections, but long sections does not export text values or dynamic section lines

RE: ORD Section exports?

Mark Shamoun — Tue, 16 Jan 2018 04:01:15 GMT

A solution I have found is to:

1. In ORD, drop the text (using Complex) to remove their annotation group properties, making them normal text

2. Ensure "Merge Visible Edges of 3D Attachments" in References of DWG Export options is ticked (and all are set to "Merge")

3. It now successfully exports to a DWG

RE: ORD Section exports?

Mark Shamoun — Fri, 12 Jan 2018 20:24:10 GMT

Hi Nico,

Attached are sample files where I am having difficulties exporting sections. I am using ORD Update 2.

communities.bentley.com/.../design.zip

communities.bentley.com/.../sects.zip

RE: ORD Section exports?

Nico Roman — Fri, 12 Jan 2018 15:09:30 GMT

Mark

can you provide your dgn to try it here? are you using update 2?

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/33435/openroads-designer-connect-edition---wiki-articles-and-videos