We are trying to use the linking code UD to set pipe inverts when our Surveyor shoots the top of casting - has anyone gotten this to work and can provide an example
We use our linking codes after the p-code separated by a space
We have tried SI[space]UD-6.5 and SI[space]UD[space]-6.5
We have set our linking code to UD and UD* neither of these has worked
Thanks
Dan
We have used the UD* for exactly the same workflow. It was successfully implemented using FBK files imported to SS4. We have gotten away from processing raw data in cadd platforms.
Cliff
Thanks Cliff - I was hoping to be able to use it when we import our CSV files - I may need to look into the FBK files as we to use Civil3D and no longer process our Survey in the Cad Platforms
PowerGEOPAK SS10 and ORD
We reduce the control traverse, RTK and levels in a software called StarNet. I found the analytics and least square adjustment to be acceptable in SS4. If your familiar with the EFBP workflow it will make sense. However the data is really volatile and susceptible to accidental "edits". I'm guilty of trashing a couple of my own projects with an overactive delete key! Good luck.