SS4 - Survey

RE: SS4 - Survey

cliff — Tue, 06 Feb 2018 18:36:20 GMT

Sorry one more item.

Before you import any data through FBK format verify the units issue has been resolved. See the link below:

https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/110966/fbk-import-to-open-roads-survey-version-ss4

Hope that helps.

Cliff

RE: SS4 - Survey

cliff — Tue, 06 Feb 2018 17:38:35 GMT

We reduce the control traverse, RTK and levels in a software called StarNet. I found the analytics and least square adjustment to be acceptable in SS4. If your familiar with the EFBP workflow it will make sense. However the data is really volatile and susceptible to accidental "edits". I'm guilty of trashing a couple of my own projects with an overactive delete key! Good luck.

RE: SS4 - Survey

Dan S — Tue, 06 Feb 2018 15:27:46 GMT

Thanks Cliff - I was hoping to be able to use it when we import our CSV files - I may need to look into the FBK files as we to use Civil3D and no longer process our Survey in the Cad Platforms

RE: SS4 - Survey

cliff — Fri, 02 Feb 2018 15:10:51 GMT

Dan

We have used the UD* for exactly the same workflow. It was successfully implemented using FBK files imported to SS4. We have gotten away from processing raw data in cadd platforms.

Cliff

RE: SS4 - Survey

cliff — Fri, 02 Feb 2018 15:09:01 GMT

The UD (updown) code can only be utilized when importing raw data. Not coordinate records. Hope that helps.

https://communities.bentley.com/products/road___site_design/w/road_and_site_design__wiki/26875/video-updown-link-code-demonstration