https://communities.bentley.com/products/road___site_design/f/geopak-inroads-mx-openroads-forum/146496/ss4---surveyCan someone explain to me what the settings under the Linking Code Feature Exclusions is used for Thanks Danen-USTelligent Community 12https://communities.bentley.com/thread/445696?ContentTypeID=1Mon, 05 Feb 2018 14:43:58 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:f4499a80-aae8-42e5-b0eb-2c7892f8101cDan S<p>Thanks Robert</p><div style="clear:both;"></div>https://communities.bentley.com/thread/445276?ContentTypeID=1Thu, 01 Feb 2018 17:43:54 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:6372a585-d70e-4ac3-a1e7-6b231aa00f10Robert Garrett<p>Some places in the world (not so much in North America) will not use linking codes but will instead connect a line between any points with the same code on consecutive points. If using this linking method then there are some codes you may wish never to be linked into a line, such as poles. You add any codes which should never be linked in the exclusion list. Since you are using linking codes then these settings are not relevant for you.</p><div style="clear:both;"></div>